Enroll Course

100% Online Study
Web & Video Lectures
Earn Diploma Certificate
Access to Job Openings
Access to CV Builder



Fix: Can’t Access Internet on Nighthawk Router

Internet . 

It can be extremely frustrating to experience no internet even after performing Nighthawk router setup process in a successful way, isn’t it? If you are also sailing on the same boat, then consider yourself lucky because you are on the right post. Here, in this article, you will get one of the best fixes that will surely going to help you to troubleshoot “can’t access internet on Nighthawk router” issue in a jiffy.

Let’s dive in!

Can’t Access Internet on Nighthawk Router

The Troubleshooting Tips

Check the Connections

The first fix that you have to try to troubleshoot “can’t access internet on Nighthawk router” issue is to check the wired connections you have made between your Nighthawk router, existing modem, PC, laptop, and other WiFi devices. Make sure that the wired connections are correct, secure, and finger-tight.

The Power Supply

Another thing that you have to do in order to fix “can’t access internet on Nighthawk router” issue is to make sure that your router as well as the existing modem are getting a steady power supply.

Yes, you read it right! Insufficient power supply may also lead you to experience the issue. Apart from this, you have to ensure that the wall sockets in which your devices are plugged in are well-working.

Check the LEDs

If you see amber color LED on your Nighthawk router, then it clearly means that you have no internet connectivity. In that case, we suggest you to contact your ISP right away. Chances are that your ISP is the culprit and you are blaming your Nighthawk router for the same.

So, without much delay, contact your internet service provider.

Ask him to fix the poor internet connectivity issue for you by clearing all your pending bills and upgrading your data plan.

On the off chance if you still see amber color LED on your Nighthawk router even after contacting your service provider, then we suggest you to restart it (the router) right away.

Power cycle or Netgear router restart process helps in fixing issue like:

  • Slow or poor internet connectivity
  • Amber, red, blinking or no LED on router
  • Unable to run or use the Nighthawk app
  • Router firmware update failed
  • Unable to perform and complete Nighthawk router setup

So, to power cycle or restart your Nighthawk router:

  • Disconnect your router from every connected device, even modem.
  • Unplug it from it respective wall socket
  • Wait for a few minutes
  • Plug it back in again

Note: Apply the power cycle process on your existing modem as well.

Check the Router’s Placement

Improper or wrong placement of Nighthawk router can also lead you to experience no or poor internet connectivity issue. So, ensure that your Netgear Nighthawk router is placed closer to your existing modem. Apart from this, also make sure that your router isn’t hidden inside cabinet or placed beneath a table. Also, avoid placing the Nighthawk device near to windows and corners.

Improper Nighthawk Router Setup

Yes that’s correct! Improper or partial Nighthawk router setup leads you to experience internet connectivity issues. So, just ensure that you have configured your router in a proper way.

Bonus Tip: Visit Netgear Genie setup wizard using routerlogin.net or 192.168.1.1 for complete Nighthawk router setup instructions. Moreover, the router can also be configured by following the instructions provided on Nighthawk app. For this, you first need to download the app and create a valid account.

Bear in mind if your router isn’t configured properly, then you have to reset your Nighthawk device and then take the plunge to set it up again.

Update Router’s Firmware

Updated firmware on your Nighthawk router also leads you to experience “can’t access internet on Nighthawk router” issue. So, without much delay, update the Nighthawk router’s firmware right away.

Connect to Correct Network

There is a possibility that you are connected to an unknown or wrong network and due to that you are getting internet connectivity issue. So, you simply have to ensure that you are connected to your router’s WiFi only.

Note: Provide the correct router login WiFi password in order to get connected to your Nighthawk’s device WiFi.

In a Nutshell

So, these were the important hacks that will surely help you to cope up with the “can’t access internet on Nighthawk router” issue in no time. Try them and let us know which hack helped you out.

SIIT Courses and Certification

Full List Of IT Professional Courses & Technical Certification Courses Online
Also Online IT Certification Courses & Online Technical Certificate Programs