How to connect victony wifi extender?

Victony Wifi Extender SetupVictony wireless range extenders are the best investment you can make in terms of cost-effectiveness. All of your online activities are streamlined, accelerated, and secured by Victony.Victony achieves this by running at 1200 MBPS.

Everything is therefore quick and easy, including downloading, streaming videos, and gaming. 

Victony extender is a great tool for fixing all of your internet-related problems because it has a tonne of features.

You will discover two methods for configuring a Victony WiFi extender in this article:

• WPS Process
• Manual process

Victony WiFi Extender Setup Using WPS

To setup a Victony WiFi Extender using WPS, follow the instructions:

• To begin with, connect your extender to your router using a nearby power source.
• After being connected, check to see if the power LED displays a solid colour image.
• Right now, press the WPS button on both the router and the Victony Wi-Fi Extender. If found, for two to three seconds, simultaneously press the buttons on each gadget.
• Your extender has been successfully connected to your router once you see a green blinking light on it.
• You can begin configuring 192.168.10.1 after waiting 10 to 15 seconds for the systems to recognise one another.
• After making contact, the extender's lead changes colour to a vivid green hue.
• Now that the extender has been moved, you can put it somewhere else in your home. Installing the extender in places where the internet does not work at all is recommended for the best results.
• Now let's look at the potential backup plan.
• Click here to view a list of ap.setup issues.

If you need help setting up your Victony Wifi Extender or if you are still having issues, call us at our toll-free number.

Victony Repeater Setup via Manual Process

• Join the extender's Wi-Fi network (the network name should be something like "Victony_EXT_xx") using your computer or other device.
• Enter the extender's IP address into the address bar of a web browser once it is open. The extender's bottom typically has a sticker with the default IP address printed on it.
• Log in to the extender's web-based setup page using the default username and password. (usually both "admin").
• Follow the on-screen instructions to configure the extender by entering the Wi-Fi network name (SSID), password, and any other required settings.
• Restart the extender after saving the changes.
• You should have your devices linked to the larger Wi-Fi network.
• Make sure the devices are connected to the wider network with good signal strength.

Note:Depending on the model of Victony extender you're using, the exact steps may change slightly.Visit the manufacturer's website or the manual for full instructions.

Continue your efforts

In case you are still facing an issue and need any guidance regarding your Victony Wifi Extender Setup contact us on our Toll-free number.

How to Reset Victony Wifi Extender ?

To reset the Victony Wifi Extender, follow these steps:

• Find the reset button: The Wifi Extender's reset button is typically found at the bottom or back.
• Turn on the device: Before resetting the Wifi Extender, make sure it is turned on.
• To reset, press the button. Press and hold the reset button for 10 to 15 seconds using a paper clip or a similar object.
• When the required amount of time has passed, let go of the button and wait for the device to restart.
• Check the status of the WiFi Extender: To make sure the WiFi Extender has been successfully reset, check its status.
• Reset the Wifi Extender: To reconnect the Wifi Extender to your router after a reset, you must first set it up once more.

What are the possible troubleshooting steps during Victony Wifi Extender Setup

• Examining the Power Source: Ensure that the device is receiving sufficient power from the power source and that it is connected properly.
• Verify that the router has an active internet connection and that it is functioning properly.
• Checking the LED Light: Verify that the WiFi Extender's LED light is flashing, which denotes that it is in pairing mode.
• If the LED light is still not flashing after entering the correct password for the router, double-check your entry.
• Extender placement: The WiFi extender should be situated close to the router and away from any potential signal-blocking objects.
• Restarting the Extender: Try restarting the router and Wifi Extender if the LED light is still not flashing.
• Update the Wifi Extender's firmware to keep it current by looking for any available updates and installing them.
• Support: If you are still having issues with the installation, get in touch with the manufacturer's support staff for additional guidance.

If you need help setting up your Victony Wifi Extender or if you are still having issues, call us at our toll-free number.