How To Polish Your Car Like a Pro

Polish Your Car Keeping your car’s end by trying new doesn’t need a paycheck’s price of apparatus or knowledgeable detail search.

“Wheeling”—i.e., sprucing a vehicle with a rotating wheel, a bit like a professional detailer would. Works by briefly heating the paint’s clear coat till it softens. A viscous liquid that fills in and dissipates blemishes.

to stop permanent injury to the paint, limit this technique of sprucing. Once a year and wax your automotive every few months. Follow these steps, and your ride can have a like-new shine in a matter of  hours.

STEP ONE: begin by laundry your automotive by hand in a shaded space. Rinse the vehicle totally however don't dry it.

Technique Tip: Wheeling could be a mussy method, thus cowl things that you simply don’t wish to scrub later. Use softer pads and sprucing compounds on dark-colored cars, as they're particularly sensitive to swirl marks. More-aggressive compounds and
pads may be used on lighter hues.

STEP TWO: Place a clean, slightly damp pad on the sharpening. Wheel and place a moderate quantity of compound on one body panel.

Unfold the polish with the wheel, employing a medium speed. The key's to stay the spinning pad parallel to the car’s surface to avoid swirl marks.

Polish Your Car Apply constant pressure and work back and forth over the whole surface of the panel. because the clear coat heats up and therefore the paint becomes considered the bit, and scratches can begin to disappear. once the compound and water area unit are thrown aside and absorbed by the froth pad, the brightened end can come into view. Stop. Move to succeed panel and repeat.

STEP THREE: As necessary, stop and launder the froth pad with a hose or an influence washer to stop it from changing into saturated or adhesive with a compound.

Technique Tip: The environs of the pad move quicker, generating additional friction than the middle. And it always carries less polish—a direction for a burned end.

Thus be particularly careful around tortuous trim areas, like washer nozzles, mirrors, emblems, and sophisticated. Bumper contours that may be polished mistreat solely  the environs of the pad.

STEP FOUR: Wash and rinse the automotive once more by hand once finished, as well as the door, trunk, and hood jambs. Dry completely.

STEP FIVE: Applying a coat of wax to the paint can facilitate mask swirl marks and canopy up most remaining surface imperfections. Mount a soft foam pad on AN orbital drum sander ANd apply an approximate 60:40 mixture of paste wax and a fine finishing polish onto the pad. Use the drum sander at a medium speed to unfold the wax onto the vehicle in an exceeding back-and-forth motion and with lightweight however steady pressure. Leave simply enough of a waxy haze to be visible once dry.