Re.brostrend Extender Setup

The word "extender" refers to something that goes beyond a repeated phrase. The Re.brostrend Extender Setup may take some time even when there is a link between the base router and the access point. There are a variety of possible causes for this.

Whatever the reason why the LED light is not blinking blue and green or if the access point is to blame, there is no need to worry since we are here to assist you in a number of ways:

Re.brostrend Extender Setup via web browser

If you are having trouble setting up your extension using the WPS button, try using ap.setup. Please push the restart button on your extender with a needle to return it to its factory preset settings. If not, please skip this step.

• Please wait until the power LED turns solid blue before starting the restart procedure.
• After that, use your wireless device to connect to your extender. BrosTrend EXT When connecting to the extender for the first time, there is no need for a wifi password. Instead, use the address re.brostrend.com or 192.168.0.254.
• You can select your admin and password during your first login.
• With your current router, choose nearby wifi networks, then set up the SSID and password.
• You can establish the connection between the extender and the existing router by the colour of the signal LED on your extender.
• The Bros Trend wi-fi extender is fully setup and ready to use.

Note:- If you need any help regarding your wifi extender setup so contact our technician or visit the official website that is ap wifi range extender setup.

Re.brostrend Extender Setup via wps button 

• First, for one to two seconds, press the WPS button on the current router.
• Within two minutes, relax the WPS button on Bros Trend.
• The extender is attempting to connect to your current router when the WPS LED begins to flicker.
• After the signal, the LED turns solid blue. If your signal LED illuminates red, your extender is too far from your router and has not yet made a solid connection with it. Your Brostrend extender is enhancing your wi-fi signal.
• If your signal is weak, check to see if your extension is linked to your current router.
• Your new router should be placed halfway between the old one.
• Use your wireless devices to connect to your extender network once it has been installed and is operational.The extender makes advantage of your current wireless name.
• The extender's default Wi-Fi password is the same as the password for your current router.
• You may use it anywhere within the range after it is connected.

You may perform this using your computer, tablet, and smartphone.

BrosTrend Dual Band Wi-Fi Range Extender Wall Plug

The fastest and simplest method to increase the range of your Wi-Fi is with a Bros Trend Wall Plug Dual Band Wi-Fi Range Extender.

Follow these instructions to install the Bros Trend Wall Plug Band Wi-Fi Range extender:

• Connect the extender to the power outlet.

• We advise doing the fundamental setup in the same space as your current router for a smooth installation.

• Wait until the power LED changes from white to solid blue.

• There are two ways to set up a Bros Trend extender: either by pressing the WPS button or through the web interface at re.brostrend.com.