Pulse Circuits Course And Certification

Tags: Pulse Circuits Course, Pulse Circuits Certificate, Pulse Circuits Training. 

What is Pulse Circuits?

A Pulse generator or a Pulse Circuit is either an electronic circuit or a part of an electronic test equipment that is used to generate rectangular based pulses. Pulse Circuits are used essentially for working with digital circuits, related function generators are used basically for Circuits that are analog.

An electromagnetic signal not only carries information around, it also describes the present condition of the Circuit. The operating functions of any Circuit can be studied by the signal that it produces.

An electronic signal is very similar to a normal signal that we come across, which symbolizes something or which tells about something. The graphical representation of an electronic signal presents us with various information regarding to the periodical changes in the parameters of the signal such as the amplitude or phase of the signal. It also provides us with informations as regarding the voltage, frequency, period of time, etc.

This representation brings up some shape to the informations that is conveyed or to the signal that is received. Such a shape of the electromagnetic signal when formed according to a certain variety, can be assigned different names, such as triangular signal, sinusoidal signal, sawtooth signal, square wave signal, etc.

The Pulse shape is formed by a fast or sudden temporary change from a baseline value to a higher or lower level value, which goes back to the same baseline value after a certain period of time. Such a signal can be referred to as a Pulse Signal.

A Pulse signal is a unidirectional, non-sinusoidal signal that is very similar to a square signal but it is not symmetrical the same as a square wave. A series of continuous pulse signals is simply referred to as a pulse train.

Features of Pulse Circuits

There are many Features and Characteristics of a Pulse Signal and some of them are:

1. Pulse width: This is used to refer to the length of the pulse that travels through the pulse circuit.

2. Period of a waveform: The period of the waveform is used to refer to the measurement from any point of the Pulse circuit on one cycle to the same point on the next cycle in the Pulse Circuit.

3. Duty cycle: The duty cycle of a pulse circuit is simply the ratio of the pulse width to the period or duration of the circuit.

4. Rise time: The rise time is used to refer to the time that it takes for the pulse to rise from 10% to 90% of its maximum amplitude.

5. Fall time: This is the time signal that it takes to fall from 90% to 10% of its maximum amplitude.

6. Overshoot: This is said to have happened when the leading edge of a waveform goes past its normal maximum value.

7. Undershoot: This is said to have occurred when the trailing edge of a waveform goes past its normal maximum value.

8. Ringing: Both undershoot and overshoot are accompanied by damped oscillations that is known as ringing.

Benefits of Pulse Circuits

There are many Benefits and Advantages of Pulse Circuit and some of them are:

1. Pulse Circuits have the advantage of a low-energy input.

2. Pulse Circuit have a better real-time operation.

3. Pulse Circuits are more effective for critical state control.

4. Pulse Circuits are easier to implement.



90% Scholarship Offer!!

The Scholarship offer is a discount program to take our Course Programs and Certification valued at $70 USD for a reduced fee of $7 USD. - Offer Closes Soon!!

Copyrights © 2020. SIIT - Scholars International Institute of Technology is a subsidiary of Scholars Global Tech. All Rights Reserved.