Plumbing tips to prevent frozen pipes this winter 2022

One of the most common wintertime problems with Sydney's pipelines is frozen pipes. Obviously, a plug isn't going to cut it. In spite of plans to replace the affected pipes, the plot must be altered to avoid a recurrence of the problem. Water can seep in through the tiniest of cracks on a daily basis, destroying your possessions and threatening the stability of your home and your family's safety.

Why do pipes sometimes freeze?

Pipes can burst from the expansion of water due to subfreezing temperatures. To see this, just picture how a tray of ice cubes looks shortly after being placed in the freezer; the water is neatly encased in each individual cube. Overfilling the tray will cause the ice cubes to freeze together, making it impossible to remove individual cubes for use in drinks. Over time, the water in each successive segment grows, fills, and combines with that of the preceding section to form a single, expansive pool.

Water pressure inside the pipe, rather than pressure from outside, is what causes the pipe to burst. So that you understand, think about this. When the entire pipe is frozen over, no water can escape because the opposite end of the pipe is also sealed off. As water freezes and expands further down the pipe, pressure develops between the obstruction and the faucet. to the point that the weakest link in the pipeline eventually gives way.

Helpful plumbing advice for the winter to prevent frozen pipes

Here are four safety measures to take into account as winter draws near.

Make sure the pipe stays toasty by wrapping it.

Any pipes that are close to an outside wall or floor in the basement or crawl area should be checked for proper insulation. Because the insulation value increases with the thickness of the materials used, you should not be bashful about wrapping oneself in as many layers as possible. Worried that there won't be enough personal space for you? Get in touch with the plumber right away for an assessment.

Don't turn off the heater or air conditioner.

Indoor pipes shouldn't be left open to the outside, so be sure to caulk any air leaks. You should close the neighboring vents to keep the cold air outside where it belongs. Also, check the wall for a hole or split near the point of entry to ensure the pipe will not leak inside the house. If you have blocked drain then you can get rid of the problem by contacting Dial Up Blocked Drain Plumbers in Sydney. 

Turn off the tap so no water is wasted.

Water damage might be devastating if the line connecting the outside faucet to the interior pipe froze and burst. Turn off the outside water supply and let the tap run for a few seconds to get rid of any remaining water.

Preserve a sizzling hot temperature.

If your stove were to catch fire, it would be disastrous for the pipes in your basement. Investing in preventative heating and maintenance will pay off by ensuring a reliable water supply all through the winter. The temperature may not be high enough to keep the pipe from freezing if you have a functional furnace but have pushed the thermostat down too low or sealed off all basement vents.

In conclusion

The danger of pipe freezing this winter can be reduced by adhering to these tips. In the event of a frozen pipe, a professional plumber should be contacted immediately.