AERIAL K WL-WN579A3 – 1200M Wi-Fi Repeater configuration

The AERIAL K WL-WN579A3 setup is a Wi-Fi repeater or range extender that is designed to boost the wireless signal coverage of your existing Wi-Fi network. It is capable of delivering a maximum speed of up to 1200Mbps, making it ideal for streaming HD videos, playing online games, and other bandwidth-intensive activities.

The device works by receiving the existing Wi-Fi signal from your router, amplifying it, and then rebroadcasting the signal to areas where the signal strength is weak or non-existent. This allows you to enjoy a seamless and stable internet connection throughout your home or office, without having to worry about dead zones or dropped connections.

Follow the given steps for AERIAL K WL-WN579A3 setup:

• Connect your router for AERIAL K WL-WN579A3 setup  to a power source and turn it on.
• Connect your computer or mobile device to the router using a wired Ethernet cable or Wi-Fi.
• Open a web browser and enter the router's default IP address into the address bar. The default IP address for the AERIAL K WL-WN579A3 is usually 192.168.0.1.
• Use the default username and password to log in to the router's web-based setup page. The AERIAL K WL-WN579A3 typically uses "admin" for both the username and password.
• Follow the setup wizard  for AERIAL K WL-WN579A3 setup your network settings, including your wireless network name (SSID), wireless security settings, and any other desired options.
• Once you have completed the setup wizard, save your settings and reboot your router.
• Connect your wireless devices to your new wireless network using the SSID and password you created during the setup process.

Now your AERIAL K WL-WN579A3 setup is successfully done, place it where you want to place 

If you are facing any kind of issue during Wavlink Extender Setup or AERIAL K WL-WN579A3 setup feel free to contact us on our toll-free number.

How to reset AERIAL K WL-WN579A3 repeater ?

Resetting the repeater will erase all of your personalized settings, including your network name and password. After resetting the device, you will need to set it up again as if it were a new device.

To reset the AERIAL K WL-WN579A3 repeater to its factory default settings, you can follow these steps

• Locate the reset button on the device. It is usually a small hole or button on the back or bottom of the repeater.
• Use a paperclip or other suitable object to press and hold the reset button for at least 10 seconds while the repeater is turned on.
• Release the reset button once the device's lights start flashing.
• Wait for the repeater to reboot. This may take a few minutes.
• Once the device has finished rebooting, it will have been reset to its factory default settings.

Firmware update 

A firmware update for the AERIAL K WL-WN579A3 repeater may provide bug fixes, security improvements, and new features that were not available in previous versions. Firmware updates are typically released by the manufacturer of the device to address any issues that have been discovered or to improve the overall performance of the device.

To perform a firmware update for the AERIAL K WL-WN579A3 repeater, you will need to download the latest firmware file from the manufacturer's website and then follow the instructions provided to install the update on the device. 

To update the firmware on your AERIAL K WL-WN579A3, please follow the steps below:

• First, download the latest firmware version for your router from the official website of AERIAL K or from the product page of your specific router.
• Use an Ethernet cable to link your router and computer.
• Open a web browser on your computer and type the default IP address of your router in the address bar. The default IP address is usually 192.168.10.1 If you are not sure about the IP address of your router, check the user manual or the bottom of the router.
• Enter the username and password to access the router's admin panel. The default username and password are usually "admin" and "password", respectively. If you have changed these login details previously, use the new ones.
• Once you are logged in, look for the "Firmware Upgrade" option in the router's admin panel. It may be located under the "Maintenance" or "Tools" section.
• Click on the "Choose File" or "Browse" button to locate the firmware file you downloaded in step 1.
• To begin the firmware upgrade process, click the "Upgrade" button.
• Wait for the firmware upgrade process to complete. It may take several minutes to finish, and the router may restart a few times during the process.
• Once the firmware upgrade is complete, log in to the router's admin panel again to confirm that the new firmware version has been installed.

If you are facing any kind of issue during Wavlink Extender Setup or AERIAL K WL-WN579A3 setup feel free to contact us on our toll-free number.