A Step-by-Step Guide to Removing Lenses from Half Rim Glasses

Half-rim glasses, also known as semi-rimless glasses, are a popular choice for many people due to their stylish and lightweight design. These glasses feature a frame that only partially surrounds the lenses, making them a great option for those who want a sleek and modern look. 

However, when it comes time to replace the lenses or clean the frames, it can be tricky to remove the lenses from half-rim glasses without damaging them.

So in this particular blog post we will be carefully describing the process of taking lenses out of half-rim glasses without any harm done. 

In cases when you have lost your prescription, you wish to have a different look, or clean your frames, it is essential to understand how to remove lenses safely. Here we will help you on how to do it and everything that you might need to know so that you can make sure that those half-rim glasses of yours will last as long as possible.

So Lets Get Started!

Step 1: Locate the Filament

Take out the small plastic filament or fishing line on the bottom of the lens that has been used to fix it. This filament is usually passed through a slot that is made around the rim of the lens.

Step 2: Remove the Lens

Take a piece of ribbon or any soft material and gently ease out the lens from the upper surface of the top of the back of the old frame. You can try to apply some pressure with your thumbs if it is still stuck to the surface.

Step 3: Wrap the Ribbon

Place the ribbon around the filament and then fold the end over the filament to the middle and pull it tight. Continue the channel with your ribbon until the filament is forced to go in as far as possible. You may hear a little snap or pop once the filament is fully in.

Step 4: Repeat for Other Lens

Do the same steps with the other lens, paying attention to the fact that the ribbon has to be put around the filament and tightened.

Step 5: Remove the Lens

When the filament is fully in, the lens can be carefully removed with a gentle tug. While doing so, ensure you do not scratch the frame or the lens by pulling the lens away gently and slowly.

Step 6: Clean the Frame

If the lens is not removable then, clean the frame using a clean cloth with a little detergent to wipe off the dirt.

Conclusion

Taking of lenses from half rim glasses is something that any glasses wearer would need to learn. Indeed, with the right tools and techniques at your disposal, then it easier and safe to remove the lenses from your half-rim glasses and they will last for several years. So, as stated in this blog article, you will be able to prevent scratch and other mishaps on the frame or lens thus keeping the glasses in good condition.

If you are looking to change your frames or clean your current half-rim glasses, it may become pertinent to remove the lenses from the frames. With this knowledge, you’ll be able to embark on this task fully prepared and with confidence and keep your half-rim glasses looking as good as new for the longest time.