Enroll Course

The PNP_DETECTED_FATAL_ERROR is not exempted. This kind of situation is usually caused by the malfunctioning Plug and Play (PNP) drivers or even the devices, and it can be resolved easily by using the following methods.

So, here are ways on how you fix the Windows 10 PNP_DETECTED_FATAL_ERROR.

1. Update or Roll Back Drivers

One of the easiest ways to resolve a plethora of blue screen errors is to make sure that your computer has the latest drivers installed in it.

However, if your drivers is updated by Windows 10 recently and you notice that the error appeared right after, it's best that you revert to the old version. Drivers can be managed easily by making use of the Windows in-built Device Manager.

How to Update a Driver

1. Update driver using Device Manager

2. Press the "Windows Key + R" to launch the Run application. Type this in the text box space "devmgmt.msc" and click the "Enter" button to open the Device Manager.

3. In the Device Manager, now navigate your way to the desired device needed and expand the menu. Right-click on the driver then select "Update Driver". Since we're dealing with the PNP_DETECTED_FATAL_ERROR, it's best that drivers should be updated related to devices such as keyboards, mice, headphones, etc.

4. In the window that opens, click on "Search automatically" for updated driver software.

5. Windows will automatically download and install the latest drivers.

6. Reboot your computer.

7. How to Roll Back Drivers

8. Rolling back a display driver

9. Press "Windows Key + R" and type "devmgmt.msc" in the text box, then hit "Enter".

10. In the Device Manager window, look for the required device and expand the menu.

11. Right-click on the desired driver and select Properties.

12. Under the Driver tab, hit the "Roll Back Driver" button.

13. After the driver has been installed, reboot your computer.

2. Boot the Computer in Safe Mode

Many times, the PNP_DETECTED_FATAL_ERROR blue screen may be caused by a third-party software or drivers that is problematic. To diagnose this issue, it's very necessary to boot your computer into safe mode.

When your computer is in safe mode, Windows boots with only essential services and applications running. All the software and drivers that are third-party will be disabled. Alternatively, to skip going through this hassle, users can take a look at some of the best free Windows 10 repair tools.

How to Boot in Safe Mode

1. Safe boot using System Configuration

2. In the Start menu search bar, type "sysconfig" and click on the System Configuration that pops out in the search results.

3. Under the Boot tab, check the Safe boot option and also select the Network sub-option under it.

4. Click OK and reboot your computer.

5. After booting into safe mode, wait for just a few minutes to see if the error will pop up again. If it doesn't pop up, then the problem was likely caused by recently installed software or a driver. If you have recently installed any new drivers, you'll need to uninstall them by using the Device Manager.

How To Uninstall a Driver

1. Uninstall Bluetooth Driver Prompt

2. Press "Windows Key + R" and type "devmgmt.msc" in the Run application. Press "Enter".

3. Check the Device Manager, navigate to the type of device (or Windows 10) you have recently installed a driver for, then expand the menu. Right-click on the specific device that is not needed and click on Uninstall Device.

4. On the Uninstall Device prompt, check the Delete the driver software for this device box.

5. Click on "OK" and wait for Windows to uninstall the driver.

6. Reboot your computer.